The short answer
Look the address up on FEMA's Flood Map Service Center for the effective flood map, and on the NYC Flood Hazard Mapper, which also shows the 2015 Preliminary Flood Insurance Rate Maps. In New York City both matter: the effective maps drive federal flood insurance requirements, and the city uses the preliminary maps in its building code. A house can be in a different zone on each map.
Step by step
- Search the address on the NYC Flood Hazard Mapper and turn on both the effective and the 2015 preliminary layers.
- Note the zone each map gives (for example AE, VE, X) and whether the building footprint, not only the lot, touches it.
- Confirm the effective zone on the FEMA Flood Map Service Center, which is what lenders check.
- Ask the seller or the city for an elevation certificate if the house is in a special flood hazard area.
Where the data goes wrong
What we have run into building property reports from these records:
- PLUTO carries flood flags for the 2007 map and the 2015 preliminary map at the lot level. A lot can be flagged while the house sits on the high side of it, so we report the zone at the building and keep PLUTO's flags as a note.
- Condo unit lots have no PLUTO row. The flood flags sit on the building's billing lot.
- Staten Island's east and south shore lots were heavily affected by Hurricane Sandy, and many were bought out or rebuilt. An old listing's flood statement may predate the current maps.
Common questions
Do I need flood insurance in Staten Island?
A lender with a federally backed mortgage requires it when the building is in a special flood hazard area on the effective FEMA map.
Which flood map does NYC use for building permits?
The city uses the more restrictive of the effective map and the 2015 preliminary map for construction in flood zones.